Black & Decker CLMA4825L2 Lawn Mower Manual

The Black & Decker CLMA4825L2 is a cordless electric lawn mower designed for efficient and easy lawn care. It features a 40V lithium-ion battery, a 20-inch cutting deck, and a lightweight design for maneuverability. This mower is equipped with a 6-position height adjustment lever, allowing you to customize the cutting height to your preference. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 40V lithium-ion battery, 20-inch cutting deck, 6-position height adjustment, lightweight design, and foldable handle for easy storage.

FeatureDescription
40V Lithium-Ion BatteryProvides cordless operation with long run time
20-Inch Cutting DeckEfficient cutting for medium to large lawns
6-Position Height AdjustmentCustomize cutting height from 1 to 3 inches
Lightweight DesignEasy to maneuver and transport
Foldable HandleConvenient storage and transport

Installation

Unpack the mower and check for all components. Ensure the battery is fully charged before first use.

  1. Attach the handle: Align the handle with the mower body and secure with screws.
  2. Insert the battery: Ensure the battery is properly seated in the compartment.
  3. Check safety features: Ensure all safety guards are in place before operation.

WARNING! Read the manual thoroughly before operating the mower. Always wear appropriate safety gear.

First-Time Setup

Power on the mower; follow the setup instructions for optimal performance.

  1. Charge the battery: Connect the charger to the battery and plug it in.
  2. Adjust the handle: Set the handle height to a comfortable position.
  3. Test the mower: Perform a short test run to ensure everything is functioning.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Controls and Settings

Access controls via the handle: Power switch, height adjustment lever, and safety key.

Power Switch: Turns the mower on and off.

Height Adjustment Lever: Adjusts the cutting height easily.

Connecting Devices

Ensure the battery is charged and properly connected before use.

  1. Turn off the mower before connecting the battery.
  2. Ensure all connections are secure.

Tip: Always check battery status before starting the mower.

Operating the Mower

Follow these steps for safe operation:

  1. Start the mower: Insert the safety key and press the power switch.
  2. Mow the lawn: Move the mower in straight lines for even cutting.
  3. Stop the mower: Release the power switch to turn off.

WARNING! Keep hands and feet away from the cutting area while operating.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the mower after each use: Remove grass clippings and debris.
  2. Check the battery: Ensure it is charged and free of corrosion.
  3. Inspect the blades: Sharpen or replace as needed.

Safety Information

Always follow safety precautions while operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery not chargedCharge the battery fully before use.
Uneven cuttingHeight adjustmentCheck and adjust the height setting.
Battery drains quicklyOld batteryReplace the battery if it no longer holds a charge.
Grass clippings cloggingDeck needs cleaningClean the mower deck after each use.

Service: For support, contact Black & Decker customer service.

Black & Decker CLMA4825L2 Lawn Mower Manual © - All Rights Reserved 2026